Skip to content
Japan Scissors Canada
Japan Scissors Canada

Sizing

Scissor sizes: a starting range for your work

How scissor sizes are named, which length range suits the cuts you do, and how to check the pair you own with a real ruler before you order.

Scissor size is a number in inches, and it is easy to over-trust. Makers do not all measure the same way: some count the finger rest, some stop at the ring, and the number on the box may be a rounded nominal size. Nominal size, overall length and blade length are three different numbers.

So treat this page as a starting point, not an answer. Begin with the work you do most. It points to a range, such as 5.0 to 5.5 inches for detail, 5.5 to 6.0 for a mix of cuts or 6.0 to 7.0 for scissor over comb, never to one fixed length. Then take the pair you already own and hold a real ruler to it, measuring the way its maker does. Last, check which sizes the model you like actually comes in, and in which hand. Try the size on your own hand before you commit, and write to us if you are between two lengths.

What do you do most?

A good place to start

Solid outline: suggested for that work. Maker guidance, as a starting point. Control and hand fit decide.

Check the pair you own

  • Overall length is roughly the inch size. Use a real ruler on the pair you own. Tip to ring end: 15.2 cm is 6.0″. Makers differ on whether the finger rest counts.
  • Blade length, pivot to tip, is the reach you cut with. Product pages show blade length when the maker publishes it.

Happy with what you use now? Stay with that size. Half an inch shorter gives more control at the tip. Longer gives more reach.

Quick fit check

  • Palm: rest the scissor flat on your palm. Tip near your middle finger: that length is worth trying.
  • Rings: they should hold without squeezing. Your thumb should slide out freely. Inserts tighten a loose ring.
Shop 6.0″

In 4.5″

In 5.0″

In 5.5″

In 6.0″

In 6.5″

In 7.0″

Every length we carry. See all shears, or meet the makers first.